To measure a window for replacement, measure the width and height of the inside opening from jamb to jamb and from sill to head. Take measurements in three places and use the smallest number. Write down both dimensions and have them ready before you call for a quote.
A homeowner in our area recently called us after watching a how-to video online to figure out how to measure a small bedroom window before calling for an estimate. She had the numbers ready, but she was not entirely sure whether she had measured the opening, the unit size, or something else. That question comes up more than you might think.
At Madison Window & Doors, we work with homeowners every day who are in the same boat. Here is a straightforward guide to help you get it right before you pick up the phone.
What Is the Difference Between Unit Size and Rough Opening?
The unit size is the window itself, while the rough opening is the framed hole in the wall that the window sits inside. For a replacement window, what matters most is the rough opening measurement, because that tells us what size window will fit in your existing frame.
If you measure from the inside of the window frame, vinyl stop to vinyl stop, that is close to what we need. Just be clear when you call and describe exactly what surfaces you measured between. That one detail helps us give you a more accurate rough estimate.
How Do You Actually Take the Measurements?
Measure the width first, then the height, and write both down exactly as you measured them. Here is the approach we recommend for a standard replacement:
- Measure the width at the top, middle, and bottom of the opening
- Measure the height on the left side, center, and right side
- Use the smallest number from each set
- Record both figures in inches and fractions (for example, 29 and 1/8 wide by 53 and 1/4 high)
Fractions matter in window work. A difference of an eighth of an inch affects the fit, so do not round up or down.
What Is a Double Hung Window, and Does the Style Affect the Measurement?
A double hung window has two sashes, both of which move up and down, and it is one of the most common window styles in homes across the region. If your window has a top section and a bottom section with a screen on the lower half, there is a good chance it is a double hung.
The style affects which replacement window we order, but the way you measure the opening stays the same regardless of style. Knowing the style just helps us match the right product to your existing setup. You can explore our composite window installation options to get a sense of what a modern replacement might look like for your home.
Should You Come Out and Measure Instead of Relying on My Numbers?
Yes, we always come out to measure before finalizing an order. Your measurements are helpful for giving you a rough idea of cost, but we do not place an order based on homeowner measurements alone. Too many small variables can affect the final fit.
Our team, which you can learn more about on our about us page, will schedule a time to come out, confirm the measurements, check the condition of the frame, and walk you through your options before anything is ordered or committed.
Frequently Asked Questions
Can I get a rough estimate without an in-home visit?
In many cases, yes. If you have reasonably accurate measurements and know the window style, we can often give you a ballpark range over the phone. Keep in mind that the final number depends on the actual site conditions, which we can only confirm in person.
What if my measurements are slightly off?
That is exactly why we always measure before ordering. If your numbers are close, it helps us plan. If they are off, we catch it before it becomes a problem. Do not let uncertainty about your measurements stop you from calling.
Does the window frame need to be in good shape for a replacement?
The frame condition matters quite a bit. If the sill or jambs are rotted or damaged, that affects both the installation approach and the overall cost. We check all of that during our estimate visit so there are no surprises.
If you are near Bainbridge, NY and have a window you have been putting off replacing, do not wait until it becomes a bigger problem. Contact us to get the process started and we will take it from there.




